Pulsatron E Plus Series Pumps

FOR CURRENT DISCOUNTS, SEE TERMS OF SALE TAB (LEFT).
With few exceptions, you get free shipping on orders over $100.00, lower 48 States of the USA.
We accept Visa, MasterCard, American Express, Discover, and PayPal.

To Get Members Only Benefits, Click "Save Time On Your Next Visit" at Check Out.

Instant message me with your questions.

IF THIS PRODUCT IS NOT AVAILABLE FOR DIRECT PURCHASE, CLICK HERE TO CONTACT US FOR A QUOTATION

PULSAtron Series E Plus Pumps

• Excellent at low and high flows
• Wide range of pressure capabilities
• Available with degassing head and/or 4-20 mA input

Pulsafeeder's Series E Plus pumps offer ease of setup and have excellent priming characteristics. All Series E Plus pumps come standard with an on/off switch and manual speed and stroke controls. The sealed housing protects electronics from outside elements.

Choose from a variety of options for different applications.We offer Series E pumps in versions for general use, chlorine or fluoride applications. Each has wet end materials that were chosen to provide the greatest chemical compatibility.  

Standard models feature a manual bleed valve to prevent loss of prime due to off-gassing of chlorine. The degassing head models go one step further, featuring Pulsafeeder's innovative degassing head, which allows the pump to be totally self-priming without the use of a bleed valve.

The 4-20 mA input models accept a direct 4-20 mA signal to control the frequency (strokes per minute) of the pump. Pump output can be adjusted manually or remotely through the use of a SCADA or PLC system. The pump also interfaces with other microprocessor devices that send a 4-20 mA electrical signal such as pH, ORP or flow meters. 

Pumps include: injection check valve assembly, foot valve/strainer, suction valve, discharge valve, 4' PVC suction tubing, 8' PE discharge tubing and 4' bleed valve return tubing.

Standard head models also include: bleed valve

4.20 mA models also include: 2 signal cords: 1 stop function signal cord and 1 signal cord for either external pacing or 4-20 mA signal input.

Repair kits (Kopkits) include: pump head, replacement diaphragm, seal, 4 pump head screws and check valves.

Specifications for all Series E Plus Pumps

• Use with: see ordering information below
• Wetted materials: see ordering information below
• Maximum viscosity: 1000 cP
• Suction lift: 4 ft dry, 10 ft once primed at 1 cP
• Duty cycle: continuous
• Turndown ratio: 100:1
• Metering accuracy: ±2%
• Tubing size: 10th digit in model number, 1 = 3/8" OD, 3 = 1/2" OD, H = 3/8" OD, B = 3/4" OD,
• Power: 120 VAC, 130 watts (other voltages available)
• Shipping weight: 10 to 25 lbs

Pumps for Chlorine and General Use with Standard Head

Use with caustic, chloramines, hydrochloric acid, potassium permanganate, sodium bisulfate and sodium hypochlorite (call for compatibility with other chemicals).

Wetted materials: head & fittings: 7th digit in pump model number-K -., PVDF; V and W ,-- PVC. PTFE seals arid 0-rings, ceramic check balls and FIFE-faced diaphragm.

The Standard Head Pump Models that you can buy from this page are:

• LPA3SA-VTC1, 12 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPA3MA-VTC1
• LPB4SA-VTC1, 24 GPD 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPB4MA-VTC1
• LPE4SA-VTC1, 44 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPE4MA-VTC1
• LPH6SA-VTC3, 120 GPD, 100 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPH6MA-VTC3
• LPH7SA-WTC3, 240 GPD, 35 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPH7MA-WTC3
• LPJ7SA-WTC3, 240 GPD, 80 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPJ7SA-WTC3
• LPH8SA-WTCB, 600 GPD, 30 PSI, 3/4" OD Tubing - Equivalent with 4-20 mA Input: LPH8SA-WTCB
• LPD3SA-KTC1, 11 GPD, 250 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: NONE
• LPF4SA-KTC1, 20 GPD, 250 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: NONE
• LPH4SA-KTC1, 40 GPD, 250 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: NONE
• LPA2SA-VTC1, 6 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPA2MA-VTC1
• LPB3SA-VTC1, 12 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPB3MA-VTC1
• LPD4SA-VTC1, 21 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPD4MA-VTC1
• LPG4SA-VTC1, 42 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPG4MA-VTC1
  

NOTE: THIS IS ONLY A SMALL SAMPLING OF E PLUS PUMPS.  WE WILL WRITE YOU A PDF QUOTATION ON ANY PULSAFEEDER PUMP.

Pumps for Chlorine and General Use with Degassing Head

Use with caustic, chloramines, hydrochloric acid, potassium permanganate, sodium bisulfate and sodium hypochlorite (call for compatibility with other chemicals).

Wetted materials: PVC head & fittings, PTFE seats and 0-rings, ceramic check balls, and PTFE-faced diaphragm.

The Degassing Head Pump Models that you can buy from this page are:

• LPA3SA-VVC9, 12 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPA3MA-VVC9
• LPB4SA-VVC9, 24 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPB4MA-VVC9
• LPE4SA-VVC9, 44 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPE4MA-VVC9
• LPA2SA-VVC9, 6 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPA2MA-VVC9
• LPB3SA-VVC9, 12 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPB3MA-VVC9
• LPD4SA-VVC9, 21 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPD4MA-VVC9
• LPG4SA-VVC9, 42 GPD, 150 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPG4MA-VVC9

Pumps for Flouride with Standard Head

Use with hydrofluosilicic acid.

Wetted materials: PVC heed & fittings, PTFE seats and C-rings and check balls, and P7E-faced diaphragm.

The fluoride Pump Models with Standard Head that you can buy from this page are:

• LPA3SA-VTT1, 12 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPA3MA-VTT1
• LPB4SA-VTT1, 24 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPB4MA-VTT1
• LPE4SA-VTT1, 44 GPD, 100 PSI, 3/8" OD Tubing - Equivalent with 4-20 mA Input: LPE4MA-VTT1
• LPH6SA-VTT3, 120 GPD, 100 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPH6MA-VTT3
• LPH7SA-WTT3, 240 GPD, 35 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPH7MA-WTT3
• LPJ7SA-WTT3, 240 GPD, 80 PSI, 1/2" OD Tubing - Equivalent with 4-20 mA Input: LPJ7MA-WTT3

Prices for the Continental 48 states of the USA only. For all other orders contact us for a Custom Quotation.